This is a special laser marking machine for automobile ball cage.

On the basis of LBGX-300C, it heightens the lifting column, the vibrating lens is equipped with CCD vision camera, and the whole machine is equipped with a conveyor belt.

A side push worktable positioning plate and a V-shaped positioning plate are installed on both sides of the conveyor belt.

The batch ball cages are transmitted to the bottom of the marking head through the conveyor belt, and the marking information is transmitted to the marking machine computer to complete the vertical marking work after CCD visual positioning.

When the ball cage reaches the positioning plate of the side push worktable, the side push cylinder on the support platform pushes the V-shaped positioning plate out pneumatically, clamps the ball cage, and after the ball cage is positioned, the shooting sensor sends a signal to the marking head to mark the side of the ball cage.

Model characteristics

1. Laser: fiber laser, high photoelectric conversion rate, long life, maintenance-free as a whole.

2. Workbench: matching assembly line conveyor belt.

3. Conveyor belt: batch conveying the ball cage to the marking area.

4. Positioning tools; side push worktable positioning plate, V-shaped positioning plate, side push cylinder.

5. Positioning device: infrared positioning of the radiation sensor in the horizontal direction, and vertical positioning of the CCD vision camera.

6. Lifting post: the marking head is hung horizontally on the lifting post, and the position of the marking head is manually adjusted according to the position of the worktable.

7. The whole machine structure: the outer surround structure, the whole machine safety factor is higher, the performance is stable.

8. Energy saving: low energy consumption, no consumable materials, maintenance-free, low operating cost.